1. Product Description
SIDISTAR® R300 is a specially designed grey-coloured process modifier consisting of spherical, submicron particles of amorphous silicon dioxide. The nature of the product allows excellent dispersion of these particles in the elastomer matrix. This leads to improved dispersion of all compound ingredients and a better flow, allowing higher extrusion speeds and smoother surface of the end product. The product is supplied in a densified, free flowing, form.
2. Application
SIDISTAR® R300 has been designed for usage in dark rubber compounds. Areas of use include flame retardant cable compounds; anti-vibration parts; hoses; roofing membranes; conveyor belts etc.
3. Packing
The product is available in big bags as well as in
LDPE small bags.
| Description | Big Bags | Small Bags |
|---|---|---|
| Bags on pallet | 1 big bag | 50 small bags |
| Net weight 1 bag | 850kg | 20kg |
| Net weight on pallet | 850kg（1874lb） | 1000kg（2205lb） |
| Gross weight | 850+20=870kg （1874+44=1918lb） | 1000+20=1020kg （2205+44=2249lb） |
| Bag dimensions (L x W x H) | 106 x 106 x 142 cm （41.7 x 41.7 x 55.9 in） | 73 x 46 x 20 cm (28.8 x 18.1 x 7.9 in) |
| Discharge spout Ø: Length: | 42cm （16.5 in） 70cm （27.6 in） | |
| Bag material | Coated woven polypropylene fabric | LDPE bag |
| Cover / protection | LDPE shrink hood | LDPE shrink hood |
| Pallet | Fumigated wood | Fumigated wood |
| Pallet dimensions incl bags (L x W x H) | 105 x 105 x 143 cm (41.3 x 41.3 x 56.3 in) | 120 x 100 x 140 cm (47.2 x 39.4 x 55.1 in) |
4. Storage Conditions
The product is recommended to be stored in a covered dry place, protected from direct UV light. Recommended storage temperature between +5 ºC and +40 ºC (+45ºF and +104ºF) . It’s important that the minimum temperature is > 5ºC (9ºF) above the dew point. Recommended relative humidity < 85%.
5. Shelf Life
We recommend that the product should be used within 2 years from production date.
6. Health, Safety and Environment
The product safety information, as well as REACH information, can be found on our website: www.sidistar.com.
7. Additional Information and contact
For further information about SIDISTAR®, a contact list can be found on our webpage www.sidistar.com
You are also welcome to send your questions to us by email: info@sidistar.com
8. Test Methods
Material data given in this product specification refer to analysis according to Elkem internal standard test methods, which are available upon request.
9. Version / Updates
The information on this product specification may be subject to change. Please check our website www.sidistar.com, for latest updates, and discard all older versions.
